Products
Fluid flow valve
- Control valves
- Ball Valves
- Butterfly Valves
- Gate valves
- Check valves
- Globe valves
- Specialty Valves
- Actuator Series
Double eccentric hemispheric valve (side mount and top mount)
Double eccentric hemispheric valve (side mount and top mount)
Update：2011/8/22 14:24:41 Hits：
tags：Double eccen****ic hemispheric valve (side mount and top mount)
VGZ Double eccentric hemispheric valve (side mount and top mount)
| Describe： |   |
|||||
| 1. The structure adopts eccentric tightening principle to achieve the purpose of gate tightening, regulating and closing through transmission mechanism. The sealing pair is metal face ring with hard face contact seal. When the double eccentric structure is opened, the valve core is located in the Tibetan sphere chamber, the circulation section is large, and the valve core is not washed out when the valve is closed, and the sphere surface of the valve core is along the valve when the valve is opened. Seat gradual, effective removal of scaling obstacles, to achieve reliable sealing. It is especially effective for mixed-flow transportation of two-phase mixed flow and easy scaling solid precipitation. 2. Valve hemispherical bimetal, base metal surfacing different alloys, valve seat also for the corresponding surfacing after special treatment, sealing surface combination into anti-corrosion, wear resistance, high strength and other types, to meet the needs of different occasions. 3. Close sealing and zero leakage of harmful gases 4. The spool of the sealing pair retains compensation. When the valve is worn out, it rotates a little when it is closed, so that it can seal reliably and prolong its service life. In addition, the user will tighten the nut off, adjust or replace the seat is still available, to avoid the valve seal failure, the whole set scrapped malpractice. |
||||||
| Design features： | ||||||
| Ball Valve Design Based on Standard ISO14313 API 6D BS 5351 GB / T 19672 Simple structure, good sealing performance and small torque Reduction and diameter structure with minimum flow resistance design (actual 0) Double eccentricity design structure of valve seat Independent sphere and stem structure Low leakage filler Fireproof, anti-static, anti-valve stem rush out design Valve Seat Functions DBB, DIB-1, DIB-2 Stem lengthenable |
||||||
| Product Range： | ||||||
| Body material: carbon steel, stainless steel, alloy steel Nominal diameter:：2"～100"（DN50~DN2500） End Connection: RF,RTJ,BW Pressure range：Class150～600（PN10~PN110） Working temperature：-46℃～+200℃ Operation : wrench, worm gear, electric, etc. |
||||||
Email